|
Jet technology Inverter air conditioner Mitsubishi Heavy Industries SRK25ZSP-W / SRC25ZSP-W uses innovative Jet technology designed on the basis of aerodynamic analysis, applied to the development of turbojet engines. Thanks to it, the air conditioner generates a large volume of air flow with minimal energy consumption. The air flow generated by JET Air Scroll system is powerful yet even and reaches the farthest corners of the room.  |
 Comfort sleep With Sleep Timer you achieve a moderate conditioning by means of a precise control on the capacity as well as additional energy savings. In a precise time range, the air conditioner increases/decreases the temperature by 1°C, depending on the mode and, in this way, maintains a pleasant environment while sleeping. For a greater comfort you can use the function for saving the louvers' position so as not to feel the air flow. |
|
Self-cleaning function Thanks to self-cleaning function moisture does not remain in the inside of the air conditioner. This prevents from mould formation and unpleasant odours when you first turn it on at the beginning of the heating season.  |
 |
Adaptive predictive control The air conditioner automatically determines the operating mode and temperature settings based on an approximate calculation and adjusts the frequency inverter. |
 |
Economy mode The air conditioner works in energy saving mode, thus maintaining a comfortable operation of cooling or heating. |
 |
Jet technology Aircraft technology is used in the airflow system of the air conditioner. |
 |
Automatic air distribution valves Regardless of the operating mode, the AC automatically chooses the best angle. |
 |
Saving the position of the valves While moving, the valves can be stopped in the desired angle. |
 |
Turning the air distribution valves into a vertical position The AC valves can be placed into the desired position which varies from horizontal to vertical. |
 |
Self-cleaning function The system suppresses the influence of the allergen detected and caught by the filter by means of controlling temperature and humidity. |
 |
Drying mode The device dries the room by means of periodical drying operations. |
 |
"Hi Power" mode The AC can work in "Hi Power" mode for 15 minutes. This mode is suitable for quick achievement of the desired temperature. |
 |
24 hour timer Using the combination of start and stop timer, you can use two operations of the timer per day. Once set, timers will start and stop the system in the set hour. |
 |
„Sleep” mode The temperature in the room is automatically controlled in sleep mode which ensures the temperature does not go up or down too much. |
 |
On/Off timer The AC will automatically start and stop in the set time. |
 |
Comfortable start In ON-TIMER mode, the AC automatically starts working a little earlier so that the set temperature in the room gets optimal on time. |
 |
Microcomputer defrosting This mode automatically removes accumulated frost and helps reducing the time for defrosting. |
 |
Self-diagnosis function In case the AC is not functioning well, an inside microprocessor automatically starts performing a self-diagnosis. The error is presented as a two digit indication. |
 |
Automatic function for restart The compensation in case of power failure is a function which saves the working status of the AC immediately before its turning off due to power outage and automatically continues operating from this moment when the power is restored. |
